AD8370AREZ OverviewPackaged in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case, the buffer op amp is ready to use. An op amp ic of the Variable Gain type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 79mA, this op amp ic can operate. Keeping the voltage gain at 34dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5.5V. Linear amplifier resistance should stay within the range of 200Ohm. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.
AD8370AREZ Features16 Pins
supply voltage of 5V
34dB voltage gain
Output Type: Differential
Resistance of 200Ohm
AD8370AREZ ApplicationsThere are a lot of Analog Devices Inc.
AD8370AREZ Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 575mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8370 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 79mA |
| Nominal Supply Current | 78mA |
| Power Dissipation | 575mW |
| Slew Rate | 5750V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 750MHz |
| Gain Bandwidth Product | 750MHz |
| Voltage Gain | 34dB |
| Gain | 34 dB |
| Noise Figure | 7.4 dB |
| Nominal Supply Voltage (DC) | 5.5V |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8370AREZ Datasheet
+8613715157867