OP97EPZ OverviewThere is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 25μV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 600μA . There should be no change in the voltage gain at 126.02dB. On the buffer amps, there are 1 channels that can be used. 600μA quiescent currents are flowing through buffer op amp.
OP97EPZ Features8 Pins
supply voltage of 15V
126.02dB voltage gain
OP97EPZ ApplicationsThere are a lot of Analog Devices Inc.
OP97EPZ Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP97 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Quiescent Current | 600μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 900 kHz |
| Gain Bandwidth Product | 900 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.00025μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP97EPZ Datasheet
+8613715157867